A few considerations about why scientific research institutes choose LED UV curing machine

Recently I received the consultation of a number of university research institutions in LED UV curing machine. I think there is a need to share with you a few considerations about researchers choosing UV LED curing machine.

1． How to control UV LED energy precisely?
LED UV curing machine for example: LED UV energy (mJ/cm2) = UV intensity (mW/cm2) * exposure time (S); therefore, the precise control of LED UV intensity and exposure time can precisely control the energy of LED UV.
Control of exposure time, our advanced LED UV curing machine, built-in computer microprocessor, can set the exposure time and a variety of models.
In terms of controlling LED UV intensity, we use computers to adjust the percentage; the current can be 0% -100%. This is because our LED can be used at any time.

2． What is the intensity distribution of LED UV curing machine?
In general, UV intensity of LED UV Curing Machine is very uniform; UV intensity changes little. GOOD full-functional microprocessor curing machine, with high-tech LED and high-tech optical lens, intensity range 1000mw/cm2-8600mw/cm2. Do not choose the so-called "uniformity" LED UV curing machine with no data at all.

3． What is LED UV spectrum like?
At present, due to the development of light-curing, a lot of applications appear, such as the area curing, visible light curing, also UVA UVB or some light-enhanced visible light, advanced LED UV curing machine, generally with a different spectrum of hardware without any change. This will greatly increase the flexibility of research and development.

4． How to LED UV energy calibration
usually a condition or test data Conditions can not be separated from quantitative. UV LED curing machine should use UV energy to measure the energy and intensity of UV. A LED UV curing machine for the UV energy is essential. GST-101A 201A is a highly economical energy Meter of the UV curing machine.

5． Security and temperature control
Advanced LED UV curing machine has a safety lock, automatically close exposure shutter to protect the safety of users. Some other designs, including cutting-edge cooling technology and computer microprocessor chip features, can effectively control temperature rise. A point which needs to be paid special attention to is that light source, because the traditional mercury lamp temperature is not well-controlled, will cause light bulb burst.

6． Stability and reliability
this is difficult to provide a direct proof of traditional crafts. In general it is the accumulation of industrial experience. General laboratory uses are not normally equipped with machines; instability light sources can seriously affect the related progress of tests. And we have a strict Japanese laboratory test reports, and test data is much higher than international standards.